Tiêu đề Hộp đựng vừa vặn cho máy hàn điểm BIFRC Tóm tắt

This is a snapfit case for the BIFRC spot welder, no mouting screws are required. The case is a tight fit, without visible gap between the case and the lid.

I used a bit of hot glue to cover the hole for the LED so the light from the LED will lightup through the semi transparant hot glue (if you don't use to much ;) )

The pcb doesn't rattle inside the case as it is kept tighly in its position.

Print Settings

Printer Brand:

Ultimaker

Printer: