Tiêu đề Hộp đựng vừa vặn cho máy hàn điểm BIFRC Tóm tắt

This is a snapfit case for the BIFRC spot welder. No mouting screws are required. The case is a tight fit, without visible gap between the case and the lid. There is a button and a hole for the LED.

I used a bit of hotglue to cover the hole for the LED so the light from the LED will lightup through the semi transparant hotglue (if you don't use to much ;) )

The pcb doesn't rattle inside the case as it is kept tighly in its position.

Print Settings

Printer Brand:

Ultimaker

Printer: