Drink Dispencer large remix Gorenje

I printed with magic PLA 3DJake with 3 walls and 3 top &bottom layers with 5% lightning infill with layer height 0.3mm. Recommend printing with a bit higher temperature on hot end for better layer adhesion. I used some old magic 3dJake pla with which i had issues printing but here it turned out satisfactory - not perfect. I really do not care if it holds my beer :)

With tuned printer it is more of a push togehter assembly that does not require gluing. But i suggest gluing - it does not hold together without glue when droping cans in it.

Original that was too big i use in my pantry, also for beer cans :)