Title Low Poly Snowman Tóm tắt Người tuyết Low Poly có thể tùy c

1. Introduction

This model is a low polygon snowman that are customisable with a lof different noses, eyes and accesories. Just print the files you want and glue them how you want. Be creative and share your makes !

Ideal as big decoration (can ben printed very large) or small ones by scaling the files.

Ideal for children to let them create and assemble their own snowman with the different accesories.

NB: I will upload accesories by the time depeding on the success ;)

2. Revision History

3. Printing Instructions

1. All elements
   • PETG or PLA.
   • Layer Height: 0,2 or 0,3 mm
   • Min 2 perimeters
   • Support - depends on parts and expectations on quality
   • Min 15% infill
   • Infill Pattern: Gyroid
   • Body, Head, Nose and TopHat can be printed in VaseMode for fast and economical printing.

4. Materials for Assembly (BOM)

• The printed parts
• A bit of glue (cyanoacrylate)

5. Manufacturing and Assembly Instructions

1. Print your files.
2. Glue the different accesories as you want. Be creative ! (It is not mandatory to glue the head to the body, placing them on top of each other should be sufficient).
3. If print in vase mode, you can add a led inside the body and the head for a diffuse light effect.

5. Notes

• G-code file only made for MK3S+. The file contains some custom lines to add a pre-heating before the printing to avoid oozing during the mesh bed levelling. And a timer at the end of the print to buzz a sound once the parts has cooled down.
• Do not use the g-code file on other machines than MK3S+ ! In any case, I recommend you to slice the .stp files by yourself to make your own g-code files.

Have a nice print !

Last note! I've spent quite a lot of time designing, iterating and prototyping on all my models. Therefore, if you enjoy them, please don't forget to like+download and then rate them, so that I can earn so prusaments to continue ;)