Pipe clamp

Clamp for attaching to a cylindrical object. Can be use to hold a tarpaulin by wrapping the tarp around the tube and than attaching the clamp around it.

Print two of each clamp for the size you want and also two barrels. Then fit an M6 coach bolt with a washer and wing nut.

Optionally you can fit another M6 coach bolt in the pivot but I found it wasn't essential.

I print in ASA with 3 walls @ 0.4, infill 20% or 2 walls @ 0.8, infill 10%. Place on the bed with the writing on the top surface.