Tiêu đề Dock cho pin dự phòng Ugreen 20000mAh USB C Tóm tắt Đâ
Đây là một bao da/bến tàu gắn trên tường để dễ dàng gắn một bộ pin vào tường và kết nối cáp USB C với nó
Mô tả
Print this model flat on its back with no supports. Infill should be 15% or greater, but most of the model is made of perimeters so infill won't affect strength by much.
This battery holder and connector guide is designed to work with the 20,000mAh Ugreen battery pack and a generic apple-style USB type C cable. Mount it to the wall with one or two command strips, or add some holes and nail it to the wall (just be careful about scratching the battery pack). Other similarly-sized battery packs will probably work as well.
To hold in the cable, I used some hot glue. Originally I planned on using a zip tie through the hole under the USB-C connector, but that was inadequate in holding the cable in the right place.
This model was made as a one-off to solve a pantry lighting problem, but I figured I should share this model in case anyone else wants to hold a battery pack nicely!
The specific cable I designed this around was this one (non-affiliated):
Giấy phép
