Pixel Pusher
Một pixel pixel hiệu quả và dễ in để đẩy các pixel kiểu viên đạn LED 12 mm vào các đạo cụ được làm từ Coroplast.
456
Lượt Xem
10
Lượt Thích
129
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
Should be printed in default orientation. 4 perimeters, at least 5 top layers, 35% gyroid infill recommended as the pusher will see lots of force depending on the props clearance.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 InternationalAttribution-NonCommercial-ShareAlike
Model files
Loading files, please wait...