Bỏ qua, tới nội dung chính
F3D
Hanging Light Eve Hook 1

3 hình

Đồ Gia Dụng

Hanging Light Eve Hook

Tác giả menerso

Lượt tải
30
Lượt thích
11
Lượt coi
269

File 2 6 MB

  • Light_Hook_1765625504.stlSTL · 2,7 MB
  • Light_Hook_Small_1765625505.stlSTL · 3,3 MB

Tạo biến thể bằng AI

Dựng một phiên bản khác của mẫu này.

Mở Studio

Mô tả

Great for hanging lights on your house. Clips onto the back of the eve and then the Command Strip adheres to the front. This thing is not letting loose. The small hooks the Command Strip attaches to the bottom side of the eve. Not as supportive as the front strip… but still works.

Be sure to clean each area with alcohol before attaching strips.

Able to print without supports. That is why the hook is on the left side of the mount, so it sits flat on the bed.

Uses the small Command Strips - https://www.amazon.com/Command-Outdoor-Refill-Strips-Re-Hang/dp/B00SH2CDLC/ref=sr_1_4?crid=2M6SOT8EM0SOE&keywords=command+strips+1.813&qid=1700871355&s=hi&sprefix=command+strips+1.813%2Ctools%2C150&sr=1-4

If you want to modify or download a STEP file, you can go to OnShape to get the full file: https://cad.onshape.com/documents/e1a0f3f3dace057556aae9b6/w/8cce7514b147a2e47c71807c/e/274a6516c397aed38aed589a?renderMode=0&uiState=65613ba970c36e66cddf45cb

Coi thêm Ẩn bớt

Thông số in

Định dạng
stl
Số file mô hình
2
Tổng dung lượng
6 MB
File lớn nhất
3,3 MB

0 bình luận

Coi tất cả