Tiêu đề Ghế giữ dây tóc Tóm tắt Giá đỡ dây tóc trên băng

A decoration for one of your Benchies and a key chain option.

No supports. 15% infill. 0.2 layers for all parts except the filament which should use 0.01 for more detail. Setting the layer pattern to “concentric” will yield a cleaner look.

If you have issues with the holder it may be temperature related. Try reducing print or bed temps or increasing fan speed.

All parts should press together and not need glue. If you want the spool to spin freely you will need to sand the inner hole.