Tiêu đề Bộ ghép nối dọc P-MagHochul Mag Tóm tắt Một loạt k

Vertical P-Mag/Hochul Mag Coupler by Qwerm

A series of vertical mag couplers designed for P-Mag's and 3D printed Hochul magazines. Designed for use in states that limit you to 10 round magazines. Couple two 10 round magazines to have a quick reloading set-up in the size of a 30 round magazine.

Orientation: Print with the hole facing down. Make sure you have good bed adhesion. Include a support blocker covering the top half of the print.

Settings Used: Material: PLA+ Extruder Temp: 60c Bed Temp: 210c Layer Height: 0.20mm Wall Line Count: 5 Infill Percentage: 50-100% Support: Yes Support Structure: Tree Support Placement: Touching Buildplate Fuzzy Skin: Disabled

Credit to Remnants for the Hochul Mag.