Batch sparge mash tun parts
Có thể in được thông qua cho Tun Mash dựa trên mát hơn
132
Lượt Xem
6
Lượt Thích
13
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
I used the following guide to make a cooler batch sparge mash tun:
Instead of the keg bung, I made these printables. Everything else follows the guide.
Cooler used is an Igloo 48QT with 25mm thick walls.
The hole was drilled using a 1.5" (~38mm) hole drill.
This makes the thicker section of the passthru ~25x37mm.
Gaskets are printed in TPU, everything else in PETG. I also used food safe RTV to seal everything.
Giấy phép
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!