Tiêu đề Giá đỡ quạt làm mát dự phòng AnkerMake Tóm tắt Giá

Is this needed….no. But then I didn't like the fans showing up in little plastic bags…so I made a box to hold them and the screws. Stacks with the nozzle holder I made (same size).

The pocket for the screws is just shy of the lid, so they can't come out.

Lid is held closed with magnets (3mmX2mm). They are designed to be press fit, but for this print most were slightly loose for some reason, but some were press fit. I always use a speck of glue to hold them in place either way to be sure they don't come out.

I included the Autodesk Fusion 360 source file, to change wording or whatever.