Frostinator/Adapter for your cordless drilling machines :)
Đính kèm cho tuốc nơ vít không dây để loại bỏ tuyết và sương giá từ kính chắn gió: D hoặc như một phần đính kèm massage? :P
Mô tả
Heyhooo :)
In the past I already designed some windshield defroster for myself. But all went dull very fast and it was a pain to use them with a little amount of frost.
So today I thought about a different approach :D What about a milling attatchment for the screwdriver? :P Well it looks a little insane but maybe it works? I don't have snow & frost here in germany atm but if you are reckless enough to test it: Please give a feedback!
I have 2 versions for you:
1) Screwed: You can mount the milling part to the axis with a normal 3 mm (wood) screw.
2) Glued: You can glue the 2 pieces together.
Printing: I would recommend to use a hard & impact resistant material. But good PLA will do the job I think. Use 4+ Perimeter so the edges have some meat on them! Sharp ice is dedicated to damage plastic :)
Have fun! And if it works (or not) give a feedback please!
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!