Tiêu đề Adapter thay thế quạt gốc bằng Noctua trong Case DeskPi Sup

The stock fans in the DeskPi Super6C case are very loud. These stock fans can be replaced with 40mm Noctua low-noise fans. However, the same screws that mount the stock fans are smaller than the mounting holes on the Noctua fans. A solution is to print the adapters in this project, which allow the stock screws to be used to mount the Noctua fans. A total of 6x adapters are needed to mount 3x Noctua fans.

Note: the hole in the adapter is only slightly larger than the threads on the stock screws. A screwdriver might be required to drive the screw through the adapter.