Tiêu đề SV06 Silicone Bed Mod Jig Tóm tắt Đồ gá này dùng để c

This Jig is for cutting down Ender 3 bed "springs", to do the sv06 silicone bed mod. I personally used the 10mm jig but i would recommend the 12 or 14mm size to get a bit more squeeze on the springs.

.2 layer height

3 walls

10-20% Gyroid infill

prints in about a hour or less depending on settings.

PSA my bed is severly warped but this mod got my bed into a useable state but can help others out with tuning