Tiêu đề Đồng xu trống có hộp đựng Tóm tắt Một đồng xu

Summary

A simply coin with a blank heads and tails face that can be customized with whatever text or vector graphic you would like to place on them and extrude. Also included is a case that holds up to 40 coins with a divider in the middle to separate 2 types of coins.

Printing Instructions

The coins are intended to be printed in the vertical orientation since they include an integral support structure as part of the model. This enables you to print with raised surfaces on both sides of the coin. Once the print is complete the coin easily breaks away from the integral support. The following are the print settings I recommend for the coin to ensure the best possible result. For the case you can use whatever settings you would like.

Layer Height: 0.16mm

Wall Loops: 4 (ensures the coin prints solid)

Detect Thin walls: true

Outer Wall Speed: 29mm/s (ensures a uniform finish on the coin)

Print Sequence: By Object (can print 5 at a time on a Bambu Lab X1/P1 Series Printer)

Material: Silk PLA