Tiêu đề Sửa cáp iPhone Tóm tắt Bản in 3d đơn giản sửa cá
Bản in 3D đơn giản để sửa chữa cáp iPhone bị hỏng
467
Lượt Xem
14
Lượt Thích
80
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
This is a simple clip on cable repair. Best printed with a 0.25mm nozzle but works also with a 0.4mm nozzle. The clip works for cables with 2.9 mm diameter.
Can be printed from PLA or PETG.
If you like the model you can buy me a coffee. :)
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 InternationalAttribution-NonCommercial-ShareAlike
Model files
Loading files, please wait...