Microphone Arm Cable Clip
Đây là một clip cáp được thiết kế để chụp lên cánh tay mic 10x10mm và cáp có đường kính 4mm.
297
Lượt Xem
10
Lượt Thích
30
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
This is a Cable Clip Designed to snap onto a 10x10mm mic arm and a 4mm diameter Cable, It is very easy to install as long as you use the print settings listed below.
For a set of 15 clips you will need ~12g of fillament.
Print Settings:
- 0.2mm layer height
- 2 perimeters
- NO INFILL
Print at this exact settings, I've tried different settings and if you use 3 walls or infill th clip is very hard to install.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!