Tiêu đề Giá treo tường bộ điều khiển Dualshock 4 Tóm tắt Gi

Wall Mount for a Dualshock 4 (or similar sized) controller.

The mounting holes are intended for use with 1.6mm nails, for use with larger nails or screws the holes would have to be expanded. Holes can be widened to ~5mm max without resizing the rest of the part.

Printable with any non flexibles (ABS, PLA, PETG….)

My Print Settings:

PLA, 0.8mm Nozzle, 0,.32mm Layer height