Tiêu đề Miếng đệm mặt Pico 4 Tăng cường FOV PRO Tóm tắt Đi

This is an improved FOV gasket for the Pico. It significantly enhances your field of view and comfort. I found it superior to both the AMVR and GeekVR versions. While it's based on another design, the original model is arguably the best gasket you could print. However, I identified a few issues that I wanted to address.

To assemble this gasket, you'll need a facial pad, Velcro straps, and I strongly recommend 5x3 magnets. For the Velcro straps, you can repurpose cable ties, which are often made of Velcro. You won't need many; one or two should suffice. While the HTC Vive facial pad is recommended, almost any will do. I suggest choosing one based on the material you find most comfortable. Magnets aren't essential, but they ensure the gasket remains securely attached to the headset.

The model might be slightly more challenging to print since the walls near the vents are quite thin, but most printers should handle it, print it in the same position as on the picture. If you encounter any issues or have suggestions, please reach out to me; I'm happy to help.

PS. English is not my native language, so I apologize for any grammatical errors.