Qidi X-Plus 3 Lid Risers

The Qidi X-Plus 3 requires that you remove the lid for printing softer filaments like PLA or PETG to prevent the build up of heat inside the chamber. You can simply remove the lid but it is fairly large and inconvenient to store. Plus having a cover on the printer when not in use is nice to prevent dust and debris from settling inside. Print these lid risers that sit between the frame and lid and will allow heat to escape the chamber and the lid can now be stored permanently back on top of the machine. Print in PLA or better in any laser resolution. Of my few criticisms of the X-Plus 3 I was not fond of the spool holder dry box placement at the back of the machine. If you appreciate my work and would like to support me check out my solutions to those problems with the links below:

Spool Stand X:

►

Super Deluxe Spool Holder

►

I also use a lot of refill spools to cut down on empty spool waste, so my blade spool is a nice addition as well:

►

A few other cool tools and materials for 3D printer enthusiasts. (As an Amazon associate I may earn a small commission at NO extra cost to you)

Polymaker PolyTerra PLA (One of my favorite filaments):

►

eSUN PLA+ (Another one of my favorite filaments):

►

Electric Screwdriver:

►