Tiêu đề Giá đỡ tuốc nơ vít Gridfinity LTT Tóm tắt Thùng Gridf

All my models are free, however, my Paypal is http://paypal.me/Stu142 if you wish to buy me a coffee or help fund the failed prototypes and time spent on this model. Much appreciated if you do. Thanks!

This is a gridfinity bin for holding an LTT Screwdriver (Amazon).

There are 3 configurations with different mounting hole combinations on the bottom. They are designed using sequential bridging so no supports are needed.

1. magnets = Press fit magnets. 2. M3 = Space to screw the bin down from the bottom with a M3 screw, works with some bases. 3. HSI = M3 heat set insert, which you can set with a soldering iron and screw the bin to the base.

Similar to Hardware Used (Affiliate Links).

6mm x 2mm Magnets https://geni.us/X9t1M (Amazon)

M3 Screw Set : https://geni.us/gfP7w (Amazon)

M3 Heat Set Insert: https://geni.us/Svm0Sl (Amazon)