Small Weather Enclosure for RJ11 outside connection

Small enclosure to house two RJ11 connectors to protect from weather. Can also be used for any other general connections as long as it fits within the internal dimensions of the box.

I had a need to house two RJ11 connectors to protect them from moisture. This basic enclosure does that. It uses two PG13.5 cable glands to prevent moisture from getting in through the cables, if installed vertically (taller piece on top) any moisture trapped on the seam should keep flowing outside of the box; and applying a small amount of moisture tape (or extreme weather electrical tape) to the seam of the two pieces should allow for installation in any other orientation. The box is printed with 5 perimeters and then sealed with exterior acrylic paint.

Please note that this would never be meant to be used in a location where it is submerged in water or where water can pool around it.