Tiêu đề Bàn đạp và đầu nối động cơ VESC Onewheel Tóm tắt

Print it with the most precise nozzle/layer height/wall width you can.

BOM :

• Footpad
  • 3 * PCB pins header (min length 21mm)
• Motor
  • 6 * PCB pins header (min length 21mm)
  • 3 * 2mm bullet connector

Tips :

• This mount is deisgn to be “locked” against the controller box “heatsink”
• You can use the help of soldering iron to push the pins in the hole
• Be sure to secure the wiring from the inside (glue, resin…)