Tiêu đề Lược thay thế Tông đơ cắt tóc Philips HC7460 Tóm tắt

A replacement comb for the medium-length comb (7-24 mm) for the Philips HC7460/15 Hair Trimmer. The original part on my machine broke and is nearly impossible to glue, so I whipped together this printable replacement. Tested it, and it works just as well as the original.

A brim is strongly recommended for this print. When printing the rails, I recommend using variable layer height with thinner layers for the slopes. PLA is perfectly suitable; I used Prusament Pearl Mouse.

After printing, simply glue the rails in place, e.g. using epoxy glue. Make sure the rails are on straight; I inserted them half way into the machine while the epoxy cured.