Tiêu đề Giá đỡ ổ cứng đơn giản ngắn Tóm tắt Đây là

This is a simple bracket for installing a 2.5" hard drive or SSD in to a 3.5" bay. It is a somewhat minimal design. Designed to be relatively cheap without being overly flimsy. With the price of my material, it costs about 50 cents CAD. (Currently roughly 40 cents US)

Note that this is shorter than a normal 3.5" hard drive. There are certain (somewhat rare) situations where you need the entire length, and all three standard holes. For this scenerio, I have a longer bracket. I also have my "deluxe bracket" which allows you to install two 2.5" drives in a single 3.5" bay, or one 2.5" drive and a fan. These brackets can be found at :

The holes on the side of this bracket should allow you to self tap a #6-32 UNC screw. (The standard ones that are used with 3.5" hard drives, not the M3 screw which has a finer thread and is generally used for optical drives and 2.5" drives - although if you find the hole too small for the 6-32, you could try an M3.)

Nov 7 2023 - Note: I had a hard drive crash and lost some of my stuff including the original source file for some of my earliest designs including this one. I took the opportunity to recreate this object in a better Cad program. The one here is now the updated version. You really should notice almost no difference.

If you liked this design, consider a tip or post a make!