Tiêu đề Tay cầm pin Hyper Go 16207 16208 16209 16210 Tóm tắt Điều

This allows you to use non-proprietary batteries in your Hyper Go 1620X series RC car without resorting to a Velcro strap. It also retains compatibility with the stock proprietary batteries.

It will accommodate batteries up to 35mm deep and 28mm tall.

Before pressing the pin in, drill the holes out with a 5/64 or 2mm bit.

I printed the model at 0.2 layer height with brim and tree supports.