Tiêu đề Tay nắm nắp cho bao vây Prusa nguyên bản Tóm tắt Một

When I upgraded my Prusa enclosure with the hinged lid add-on I found the original handle to be way too bulky and massive. So I designed this lighter and smaller version which covers the hole and reaches far enough to get a good grip to open the lid.

It is secured with three of the original black M3x8 screws and one square nut (the slot for the square nut is bit wider because I accidentally bought DIN557 instead of DIN562 nuts…).

To go without supports I added three little cylinders inside the screw holes which can easily be taken apart with pliers after printing.

The gcode file is for MK4 with input shaping.

Original Onshape project can be found here: https://cad.onshape.com/documents/c2fb2e44120801566214758d/w/0a0c2c1300888b9e92c43d24/e/10a89188140ad4291ed3a141

PS: And the Prusa writing glows, if you add lights to your enclosure :-)