Tiêu đề Starfield Credstik Tóm tắt Tạo một bản sao của loại

Here is a simple kit to build a credstik from Starfield. Tried to get it as close as possible using the in-game model as a reference. Matched the original font (calibri) for better quality, but it prints very thin with a .4mm nozzle, working best using Prusaslicer's ‘Arachne’ perimeter generator. Turns out ok, but a smaller nozzle might make the text appear cleaner.

There are two versions for the green plates that work with color swapping: ‘raised text’ and ‘MMU’.

• ‘Raised text’ lets you pause and swap filaments to get the gold text onto the green parts. Here is a guide that explains how color swapping works, at least with Prusaslicer: https://help.prusa3d.com/en/article/color-change_1687
• 'MMU' lets you print either with a multi-material printer or with a standard printer using some settings tweaks. Here's a guide to printing multicolor on the first layer with a standard printer.

The ‘connector’ is intended to help align the green plates when gluing.

Filaments used in the photo were CC3D PLA silk gold and jade, with the green plates having a single layer of Prusament galaxy green to make the lettering more visible.