Tiêu đề Chân đế trưng bày Corsair Tóm tắt Chân được giữ b
Chân được giữ bởi các ốc vít 2 m4x25 mm. Ma sát tấm phù hợp với khe ở phía trước. Lưu trữ cho 6 phi tiêu chiều dài.
212
Lượt Xem
2
Lượt Thích
22
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
You'll have to customize the plate with your text before printing. Needs 2 M4x25 mm screws though you may use 8-32x1" screws with lube. I printed the stand with Hatchbox matte 1.75 mm PLA filament. Printed with 3 walls, 15% infill.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons Attribution-NonCommercial 4.0 InternationalAttribution-NonCommercial
Model files
Loading files, please wait...