Tiêu đề Nêm nhỏ để sử dụng với Bàn xoay cho Qidi X-Max-3 của

I made a Lazy Susan turntable for my Qidi X-Max-3 printer for easier access to the rear of the printer. My original idea was to use a slide (Barrel) bolt to lock the turntable in position but there is too much play and that would be noisy and might affect the prints but mostly would drive me insane. So, I designed a simple wedge to slip under the turntable to lock in in place. With four wedges placed under all four corners (near the corners), it locks the turntable down as intended.

Video of the turntable and wedges in action! https://photos.app.goo.gl/zWaCL5szVdgwHYxM6