Two layer Zen Garden with Torii Gate Garden with tools

Designed to fit on smaller print-beds like the Prusa Mini (barely), this is a two-layer Zen Garden, with a main bed piece and a Torii-Gate made to fit into three separate slots in the bed so that you can position it where you prefer. The top of the Torii Gate is another Zen Garden bed as well, for second layer of Zen goodness. The Torii Gate was inspired specifically by the Itsukushima Torii Gate at Miyajima.

I have also included not one, not two, but eleven different tools for use in the Zen Garden, including size-appropriate tools for working around the base of the Torii Gate (the “small” set of tools), and an Entrenching Tool for whenever your Zen is under threat and you need to dig a foxhole and fight Zen Warfare.

Sand not included.

You will need to print either the regular (thick) or thin Zen Garden Beds, and: Two Torii Standx2 (file fixed 11/11/23) One Torii Bed One Torii Crossbar.

The Torii Crossbar fits into the slots in the Torii Stands and can be glued in place, and the Torii Stands will fit into the circles in the Zen Garden Bed. The Torii Bed fits on top of the Torii Stands. It will likely require supports.

I am still working on getting my printer back up and running to complete this design and test it. A thin and thick bed are included, and I intend to include a bed that has slots for tool-storage, hence why there are three positions in this model for the Torii Gate, instead of just two; one would be redundant until that can either decide if you have your tool storage on the front or back side in relation to the Torii Gate.