Tiêu đề Giá đỡ giỏ Portafilter từ tính 58mm dưới kệ Tóm tắ

A compact holder for two 58mm portafilter baskets that screws to the bottom of any shelf. There are pockets on the top to press in up to 20 5mmx2mm, round, neodymium magnets that help keep the baskets from rattling out of the holder.

This has been tested with VST, IMS, and Gaggia baskets but will likely fit any other 58mm baskets.

Food Safety

Printing a part from food safe plastic does not make it food safe! The surface of FDM 3D prints traps bacteria and is usually not water-tight, even if it looks like it is.

Since the items this shelf holds can be wet and are frequently in contact with coffee, consider coating it with a food contact rated epoxy. The shelf in the pictures is coated with MAX CLR which is formulated for direct food contact in accordance with FDA regulations. Always follow all manufacturer curing and use guidelines to ensure the finish is food safe. Be sure to wash the part with warm soapy water after the epoxy cures before using..