Endcap for PTFE/bowden tubes
Đối với hầu hết các ống Bowden 4mm
157
Lượt Xem
5
Lượt Thích
31
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
Seal PTFE tubes while the filament is not in use, keep it dry in the drybox, with few cm filament kept outside of the tube you can easily pull it out, no need to open the drybox to roll the spool. Friction fit. For better user experience I suggest using TPU to print.
Material: TPU Support: No Layer height: 0.2 Infill: 100%
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!