Tiêu đề Benchdog - Giá đỡ cho hệ thống Gridfinity Tóm tắt Giá

This is a holder for 4 x benchdogs/timber dogs/Bankhaken using the Gridfinity System. The Gridfinity size is 2x2.

Recommended material: TPU (flexible) The benchdogs have tight sittings, therefore I've printed mine in TPU (flexible). They have a very good fit. Other materials should also work, using these, you might have a sanding procedue afterwards. In TPU: no sanding ,…

Recommended printer settings:

Nozzle: 0,4 mm

Layer height: 0,2 mm

No supports

Have fun with this benchdog holder!