Ryobi Bs904g Bandsaw Leveling Knob
Răng trên đòn bẩy cân bằng chứng khoán có thể bị mòn, đây là một sự thay thế.
77
Lượt Xem
6
Lượt Thích
12
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
Nội dung được dịch bằng AI
The teeth on the stock leveling lever can wear down, this is replacement in the form of a regular knob. You may even want to give it a go even if your stock lever is fine, this is much easier to use.
Take of the original lever, and push this on. Recommend to hold it on with a washer and M4 bolt.
Optionally use some loctite on the teeth to make sure it has no chance of slipping (unlikely).
I printed it with PLA 35% infill.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!