Tiêu đề Giá treo dưới bàn nguyên bản của PS4 Tóm tắt Một g

The model was designed to use with countersink 5mm screws; you'll need 8.

I printed it in Esun PETG with 4 perimeters using a 0.6mm nozzle. It's probably overkill, but better safe than sorry. :)

You may need to use supports depending on your filament and printer to get the overhangs in the holes to print. I used organic supports.

Note: This was only tested with my PS4 original and uses friction to keep the console in-place. PS4 pro will probably not fit.