Christmas Tree

Here are 6 Christmas Tree designs to fit over a tealight or used plain just for decoration.

The stl file is solid to be printed in vase mode to make the tree hollow. Use 0 bottom and 0 top layers. The use of a brim will be helpful to get the tree to stick to the print bed. Trees are 87mm to 100mm wide, depends on the model, and 120 tall and can be scaled to meet your need. I used a .8 layer height and the tea light wouldn't show through. I did not try a .4 layer height as there are some horizontal layers that are very steep.

Nozzle size: 0.4 mm

5mm or larger brim recommended

0.2mm layer height 0.6mm wall line width recommended to let the tea light show through 50mm/sec print speed Spiral Vase Mode enabled (spiralize outer contours in eSlicer)