Star Wars Z95 Headhunter

Replica of a Z95 Headhunter at 1:270 scale. There are two Versions:

1. The standard Z95 is based on its most common appearance, especially in legends. This starfighter has many different versions, so you might be familiar with a different one. It is 43.7mm long and has a wingspan of 34.56mm.
2. The clone Z95 is based on how it appeared in clone wars. It is 62mm long and has a wingspan of 67.18mm. (It's surprisingly big.)

For a stand/holder, its compatible with a slanted pin, peg and small base from here.

Print instructions

Printed at 0.07mm layer height. Rotate by -90° along the x-Axis before slicing.

Needs support on buildplate.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#