Tiêu đề THE POT REMOVER Tóm tắt Đã từng gặp vấn đề khi thá

Ever had the problem of removing a inner pot out of an outer pot to check the waterlevel? This is your problem solver. With THE POT REMOVER you can easily handle your pots. Under files you find two print options. Number one (PotRemover_01.3mf) is meant for printing with usual PLA. Dedicated 100% infill locations support the right spots of the handle to reach the highest material rigidity. The second configuration (PotRemover_02.3mf) is optimized for transparent filament. I used fillamentum PLA Crystal Clear. All parts (*.stl) are correctly aligned to give you the best part performance according FDM-printing direction. This ensures that even heavy pots can be easy lifted. The handle is designed to fit 450mm diameter inner pots.

Pot combination:

• Inner pot: Deroma Day R (https://www.doitgarden.ch/de/p/657666900000/deroma-day-r)
• Outer pot: ISIS (https://www.pointvert.ch/pots-en-plastique/5905-isis-d50-x-h38cm-46l.html)

The material you need is the following:

• 4pcs M3x12mm cylinder screw (https://www.schraubenking.ch/M3-x-12mm-Zylinderschrauben-DIN-912-Stahl-verzinkt-88-P003601)
• 4pcs M3 nut (https://www.schraubenking.ch/M3-Sechskantmuttern-DIN-934-Stahl-verzinkt-FKL-8-P002545)

Have fun.