Mô hình 3D - Title: Bambu Frame with Litho Rack Summary: I hav

I have taken the Bambu Labs Lithophane picture frame and made the following changes to it.

• Removed the adjustable picture stand.
• In the place there is now a fixed stand that stores at least three lithophanes.

The frame also has branding removed as well.

I would advise the following to print

• Filament type: Not limited (Dark colours are recommended)
• Wall loops: 5
• Top shell layers: 5
• Bottom shell layers: 5
• Sparse infill density: 80%
• Support: tree (auto)
• Use of support material to make support removal easier

PLA can be used if desired or any other material though change your settings if needed.

I would also be careful removing support material as the frame is easy to break if not careful otherwise you might find it easier printing the frame on it's side.

https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions