Supermicro SC846 2.5" HDD/SSD Mount
Cơ sở để lắp SSD bên trong khung gầm SC846.
Mô tả
In my Supermicro SC846, I have the BPN-SAS2-846EL1 backplane with SAS expanders. This means that all the drives in the 24 bay must be connected through my HBA.
If you're running a hypervisor, such as Proxmox, you may want your hypervisor to be installed on a separate disk.
This allows you to mount one or more 2.5" HDD/SSDs inside your chassis and connect them directly to your motherboard.
The HDD/SSD caddies are intentionally a bit loose, but should be fine for keeping the drive secure. If there's enough interest, I may redesign for a tighter fit or add a latch.
Notes:
This mod requires the ATX PSU mount and is designed to use with the included HDD caddies.
Giấy phép
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!