Flared AR15 Magwell V1.1
Magwell loe dạng kẹp (clamp-on) đơn giản cho AR-15, hỗ trợ bản V1.1 có thêm tùy chọn dùng heat set insert. Gợi ý in: đặt theo mặt đáy; vật liệu PLA+ và không cần support.
Mô tả
Flared AR15 Magwell bởi Qwerm
Một magwell loe dạng kẹp (clamp-on) đơn giản cho AR-15.
Changelog:
V1.1 - Thêm phiên bản dùng heat set insert.
Orientation: In theo mặt đáy (bottom face).
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Thickness: 0.1mm
Fuzzy Skin Density: 10.0mm
Parts Needed:
2x M4 25mm Socket Cap Head Screws
2x M4 Nuts HOẶC 2x M4 Heat Set Inserts
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!