Temperature-Tower – Tháp nhiệt độ (Calibration) có thể tuỳ chỉnh
Temperature-Tower (tháp nhiệt độ) tuỳ chỉnh để test nhiệt in. Có hướng dẫn chỉnh bằng py-script hoặc dùng G-code mẫu cho PLA/PETG (nozzle 0.4, layer 0.2mm) và custom G-code cho PrusaSlicer để đổi nhiệt theo từng tầng.
Mô tả
Để chỉnh Temperature-Tower, bạn có thể dùng py-script.
https://github.com/HerrSkunkhunt42/temptower-gcode-adjustment
Hoặc dùng file G-code mẫu cho PETG hoặc PLA với nozzle 0.4 và layer height 0.2mm.
Nếu bạn dùng PrusaSlicer, bạn có thể chèn custom G-code sau vào mục: Printer settings > Custom G-code > Before layer change G-code.
M104 S{start_temp - int(temp_increase * int((layer_z - height_base) / temp_level_height_in_mm))}
Hãy đổi start_temp, temp_increase, height_base và temp_level_height_in_mm theo thiết lập bạn cần.
Ví dụ:
M104 S{230 - int(5 * int((layer_z - 1.2) / 10))}
Giấy phép
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!