Olaf cùng Anna và Elsa – Set Support Free
Bộ model “Olaf with Anna and Elsa Support Free Set” được remix để in không cần support và đã in thử thành công. Olaf và Elsa làm “support” cho Anna; kèm gợi ý file STL (Union) và thông số in PLA cơ bản.
Mô tả
Thiết kế gốc:
https://www.myminifactory.com/object/3d-print-anna-from-2013-frozen-23753 bởi Tanya Wiesner
https://www.myminifactory.com/object/3d-print-elsa-from-2013-frozen-23754 bởi Tanya Wiesner
https://www.thingiverse.com/thing:4363123 Olaf (Dễ in, không cần support) bởi Alsamen
Video time-lapse in: https://youtu.be/nXSQrnCdxPc
Remix để in không cần support và đã in thử.
Đăng ký để xem thêm video time-lapse 4K không cần support:
Đăng ký ngay!
youtube.com/watch?v=0m4EnaPzadk&list=PLiilF_5yk3dPSMlEYUnDXscJI6oKquxvo
Nghiện 3D Printing hả? Xem mấy video time-lapse này nè!
https://youtu.be/jKpW-CI5O6M
https://www.youtube.com/watch?v=qtqErycp1b8
Print Settings
Printer:
Prusa
Rafts:
Không
Supports:
Không
Resolution:
0.2
Filament: Any PLA Any
Ghi chú:
Olaf và Elsa sẽ đóng vai trò làm “support” cho Anna.
Mình đã in ngon lành trong video timelapse với file AnnaElsaOlaf100M.stl và Cura.
Theo mong muốn của Ncsufire ở phần comment, mình kéo phần váy của Anna dính qua Olaf để liên kết chắc hơn. File đã upload: AnnaElsaOlafUnion_ncsufire.stl
Lấy mẫu ra khỏi tấm kính phủ film tháo rời (removable filter glass sheet) hoặc steel sheet thì dễ.
Còn nếu bạn thử in trên kính (glass) hay build plate cứng (rigid build plate) thì… chúc may mắn.
File AnnaElsaOlafUnion.stl có vẻ sẽ ổn nếu bạn dùng Simplify3D. (Nhờ phản hồi giúp)
Danh mục: People
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!