Khay Gridfinity bằng bìa carton (làm lại để chính xác hơn)
Khay Gridfinity nhẹ dùng bìa carton, remake hoàn toàn từ thiết kế Daviel Black để sửa lỗi bo tròn khiến khay không click vào grid. Giúp giảm lượng nhựa so với khay tiêu chuẩn. Có kèm file OpenSCAD.
Mô tả
Các khay Gridfinity nhẹ làm từ bìa carton. Đây là bản làm lại hoàn toàn từ thiết kế gốc của Daviel Black. Mình làm bản này vì phần bo tròn trong thiết kế của anh ấy bị sai nên khay không “click” vô lưới grid. Cách này giúp bạn giảm lượng nhựa dùng so với các khay tiêu chuẩn.
Để tránh lỗi elephant foot, hãy in các khay này với phần rãnh (gutter) để lắp miếng bìa carton quay lên trên!
File OpenSCAD đã được đính kèm.
Giấy phép
Tìm hiểu thêm về giấy phép này tại http://creativecommons.org/licenses/by/4.0/
File mô hình
v2.scad
1x1-bottom.stl
1x1-top.stl
2x1-bottom.stl
2x1-top.stl
2x2-bottom.stl
2x2-top.stl
3x1-bottom.stl
3x1-top.stl
3x2-bottom.stl
3x2-top.stl
3x3-bottom.stl
3x3-top.stl
4x1-bottom.stl
4x1-top.stl
4x2-bottom.stl
4x2-top.stl
4x3-bottom.stl
4x3-top.stl
4x4-bottom.stl
4x4-top.stl
5x1-bottom.stl
5x1-top.stl
5x2-bottom.stl
5x2-top.stl
5x3-bottom.stl
5x3-top.stl
5x4-bottom.stl
5x4-top.stl
5x5-bottom.stl
5x5-top.stl
1x1-bottom.stl
1x1-top.stl
2x1-bottom.stl
2x1-top.stl
2x2-bottom.stl
2x2-top.stl
3x1-bottom.stl
3x1-top.stl
3x2-bottom.stl
3x2-top.stl
3x3-bottom.stl
3x3-top.stl
4x1-bottom.stl
4x1-top.stl
4x2-bottom.stl
4x2-top.stl
4x3-bottom.stl
4x3-top.stl
4x4-bottom.stl
4x4-top.stl
5x1-bottom.stl
5x1-top.stl
5x2-bottom.stl
5x2-top.stl
5x3-bottom.stl
5x3-top.stl
5x4-bottom.stl
5x4-top.stl
5x5-bottom.stl
5x5-top.stl
v1.scad
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Remix (0)
Có thể bạn quan tâm
Đang tìm các mô hình liên quan...
Chưa có bình luận nào. Hãy là người đầu tiên!