Phụ kiện mẫu FPV Drone cho khung carbon fiber Skylite
Bộ mounts in 3D cho khung drone Skylite carbon fiber. Khuyến nghị in PLA 15% infill hoặc PC Blend 100% infill, dùng support trên build plate + organic supports, layer .20. Gợi ý dùng ốc 18-8 flanged button head.
Mô tả
Với PLA. In 15% infill, bật support on the build plate và organic supports. Layer height .20 (balanced hoặc structural).
Với PC Blend. In 100% infill, bật support on the build plate và organic supports. Layer height .20 (structural).
Lưu ý: Nếu có thể, cân nhắc mua ốc 18-8 Stainless Steel Flanged Button Head Screws. Nguồn mua ổn là McMaster-Carr. Đầu ốc flanged-button theo mình thấy sẽ cho đường kính lớn hơn khoảng 2mm so với ốc button head tiêu chuẩn.
Giấy phép
Tác phẩm này được cấp phép theo
Standard Digital File LicenseStandard Digital File
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!