Giá Treo Tường Grabo Pro Lifter/Nemo
Giá treo tường cho Grabo Pro Lifter/Nemo, in bằng PETG với 3-4 perimeters/15-25% infill. Có 2 phiên bản: chia đôi để in máy nhỏ hoặc nguyên khối cho máy lớn. Cần hỗ trợ cho phần flange.
402
Lượt Xem
12
Lượt Thích
126
Lượt Tải
Cập Nhật Dec 30, 2025
Mô tả
Nội dung được dịch bằng AI
In PETG, in 3-4 perimeters/15-25% infill.
In 2 parts, joined with a bit of CA glue to fit my Bambu printer. I also have a non-split version if your printer is bigger.
Needs support for the flange, I used tree supports for easier removal.
I also posted a model of the Grabo Pro Lifter itself, in case you need it for other things.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!