Ghost Rider - HueForge

In 100% infill, print with a layer height of 0.08mm and a base layer of 0.16mm.

The Model is 108x170mm in size.

PLA Black

PLA Grey

PLA BambuLab Basic Red

PLA BambuLab Basic Pumpkin Orange

PLA BambuLab Basic Sunflower Yellow

PLA BambuLab Basic Jade White

This print uses 6 unique filaments.

Swap Instructions:

Start with Black.

At layer #10 (0.88mm) swap to Grey.

At layer #14 (1.2mm) swap to Black.

At layer #16 (1.36mm) swap to Red.

At layer #19 (1.6mm) swap to Pumpkin Orange.

At layer #24 (2mm) swap to Sunflower Yellow.

At layer #27 (2.24mm) swap to Jade White for the rest.

Frame Version:

At layer #31 (2.56mm) swap to Pumpkin Orange for the rest.

If you only have one AMS, you can print it in 4 colors using these settings, but it won't turn out as detailed:

PLA Black

PLA BambuLab Basic Red

PLA BambuLab Basic Sunflower Yellow

PLA BambuLab Basic Jade White

Swap Instructions:

Start with Black.

At layer #16 (1.36mm) swap to Red.

At layer #24 (2mm) swap to Sunflower Yellow.

At layer #27 (2.24mm) swap to Jade White for the rest.

Frame Version:

At layer #31 (2.56mm) swap to Red for the rest.