HueForge - Đức Bà của Cái Chết
Hueforge - Chúa của chúng ta về cái chết của chúng ta
Mô tả
Tiếng Ý
Stampa con riempimento al 100% con un'altezza dello strato di 0,08 mm con uno strato di base di 0,16 mm
Filamenti utilizzati: PLA Generico Nero PLA Generico Grigio PLA Generico Giallo PLA Generico Bianco
Istruzioni per lo scambio: Inizia con il nero Al livello n. 9 (0,8 mm) passa al grigio Al livello n. 12 (1,04 mm) passa al giallo Allo strato n. 13 (1,12 mm) passa al bianco per il resto.
Tiếng Anh
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA Generic Black Transmission Distance: 5 PLA Generic Grey Transmission Distance: 5 PLA Generic Yellow Transmission Distance: 5 PLA Generic White Transmission Distance: 5
Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #12 (1.04mm) swap to Yellow At layer #13 (1.12mm) swap to White for the rest.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — NoDerivativesCC-BY-NC-ND
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!